Erigeron annuus Extract Improves DNCB-Induced Atopic Dermatitis in a Mouse Model via the Nrf2/HO-1 Pathway.

Atopic dermatitis (AD) is a persistent inflammatory skin condition resulting from an intricate interplay among genetic, immunological, and environmental factors. Erigeron annuus (EA), an annual winter plant belonging to the family Asteraceae, possesses anti-inflammatory, cytoprotective, and antioxidant activities. In this study, we hypothesized that Erigeron annuus extract (EAE) could be an effective agent for ameliorating AD-like symptoms. To confirm this hypothesis in vitro, we used H2O2-stimulated human keratinocytes (HaCaT cells) to demonstrate that pre-treatment with EAE protected against oxidative stress. HaCaT cells pretreated with EAE and stimulated with H2O2 showed decreased intracellular malondialdehyde content, increased superoxide dismutase activity, and reduced intracellular reactive oxygen species accumulation. To verify the in vivo hypothesis based on the intracellular results, an AD disease mouse model was induced with 1-chloro-2,4-dinitrobenzene (DNCB), and EAE was orally administered at a non-toxic concentration according to the toxicity evaluation results. The results showed that AD disease models in BALB/c mice exhibited reduced ear epidermal thickness, scratching behavior, and mast cell infiltration. In conclusion, our results indicate that EAE has the potential to improve AD by upregulating the nuclear factor erythroid 2-related factor 2 (Nrf2)/heme oxygenase-1 (HO-1) signaling pathway.

Laser-Induced and MOF-Derived Metal Oxide/Carbon Composite for Synergistically Improved Ethanol Sensing at Room temperature.

Advancements in sensor technology have significantly enhanced atmospheric monitoring. Notably, metal oxide and carbon (MOx/C) hybrids have gained attention for their exceptional sensitivity and room-temperature sensing performance. However, previous methods of synthesizing MOx/C composites suffer from problems, including inhomogeneity, aggregation, and challenges in micropatterning. Herein, we introduce a refined method that employs a metal-organic framework (MOF) as a precursor combined with direct laser writing. The inherent structure of MOFs ensures a uniform distribution of metal ions and organic linkers, yielding homogeneous MOx/C structures. The laser processing facilitates precise micropatterning (< 2 µm, comparable to typical photolithography) of the MOx/C crystals. The optimized MOF-derived MOx/C sensor rapidly detected ethanol gas even at room temperature (105 and 18 s for response and recovery, respectively), with a broad range of sensing performance from 170 to 3,400 ppm and a high response value of up to 3,500%. Additionally, this sensor exhibited enhanced stability and thermal resilience compared to previous MOF-based counterparts. This research opens up promising avenues for practical applications in MOF-derived sensing devices.

Missense Variant c.3301C>T (p.R1101W) in von Willebrand Factor A Sequence in a Patient with Recessive Dystrophic Epidermolysis Bullosa Pruriginosa with Compound Heterozygous COL7A1 Variants.

Dystrophic epidermolysis bullosa (DEB) pruriginosa is a rare subtype of DEB characterized by multiple, violaceous, and severe pruritic lichenified nodules along with blisters. Here, we report the case of a Korean male who, since the age of 3 years, had multiple pruritic nodules with blisters on both lower extremities. Genetic testing is required to diagnose DEB pruriginosa because its clinical and histologic features are inconclusive. We identified compound heterozygous COL7A1 variants of c.5797C>T (p.R1933*) and c.3301C>T (p.R1101W) in the patient, leading to a diagnosis of recessive DEB pruriginosa. Among the variants identified, c.3301C>T is a novel missense variant that has not been reported previously. This variant is in exon 26, which encodes von Willebrand factor A (vWFA) in collagen type VII. vWFA is known to preserve normal dermal structures by interacting with dermal collagens and basement membranes. Considering that this variant contradicts the general concept that autosomal dominant inheritance is more common and that variants typically occur in the triple helical collagenous domain of COL7A1 in DEB pruriginosa, we focus on the rarity of this case and the possible pathogenic role of the c.3301C>T (p.R1101W) variant.

Refractory Bullous Pemphigoid Successfully Treated with Reslizumab: A Possible Novel Therapeutic Modality.

Bullous pemphigoid (BP) is a chronic, autoimmune blistering disease that has concerning morbidity and mortality rates. Recently, several studies have focused on eosinophils due to their significant role in the pathogenesis of BP, considering that they are ubiquitous in the serum, tissue, and blister fluids of patients with BP. With this context, precision therapy that targets mediators of eosinophil activity could be a possible novel therapeutic strategy. Interleukin (IL)-5 is crucial for B-cell maturation, which consequently results in immunoglobulin production, and promotes eosinophil differentiation, proliferation, and activation. To our best knowledge, reslizumab has not yet been reported to treat BP. Herein, we report a case of steroid- and omalizumab-resistant BP treated successfully using reslizumab. Our data suggest that IL-5 could be a novel specific biologic target within the entire immunopathogenesis of BP, and reslizumab would be a novel therapeutic modality.

Protocatechuic Acid and Syringin from Saussurea neoserrata Nakai Attenuate Prostaglandin Production in Human Keratinocytes Exposed to Airborne Particulate Matter.

Saussurea neoserrata Nakai offers a reliable and efficient source of antioxidants that can help alleviate adverse skin reactions triggered by air pollutants. Air pollutants, such as particulate matter (PM), have the ability to infiltrate the skin and contribute to the higher occurrence of cardiovascular, cerebrovascular, and respiratory ailments. Individuals with compromised skin barriers are particularly susceptible to the impact of PM since it can be absorbed more readily through the skin. This study investigated the impact of protocatechuic acid and syringin, obtained from the n-BuOH extract of S. neoserrata Nakai, on the release of PGE2 and PGD2 induced by PM10. Additionally, it examined the gene expression of the synthesis of PGE2 and PGD2 in human keratinocytes. The findings of this research highlight the potential of utilizing safe and efficient plant-derived antioxidants in dermatological and cosmetic applications to mitigate the negative skin reactions caused by exposure to air pollution.

Weakly coordinated Li ion in single-ion-conductor-based composite enabling low electrolyte content Li-metal batteries.

The pulverization of lithium metal electrodes during cycling recently has been suppressed through various techniques, but the issue of irreversible consumption of the electrolyte remains a critical challenge, hindering the progress of energy-dense lithium metal batteries. Here, we design a single-ion-conductor-based composite layer on the lithium metal electrode, which significantly reduces the liquid electrolyte loss via adjusting the solvation environment of moving Li+ in the layer. A Li||Ni0.5Mn0.3Co0.2O2 pouch cell with a thin lithium metal (N/P of 2.15), high loading cathode (21.5 mg cm-2), and carbonate electrolyte achieves 400 cycles at the electrolyte to capacity ratio of 2.15 g Ah-1 (2.44 g Ah-1 including mass of composite layer) or 100 cycles at 1.28 g Ah-1 (1.57 g Ah-1 including mass of composite layer) under a stack pressure of 280 kPa (0.2 C charge with a constant voltage charge at 4.3 V to 0.05 C and 1.0 C discharge within a voltage window of 4.3 V to 3.0 V). The rational design of the single-ion-conductor-based composite layer demonstrated in this work provides a way forward for constructing energy-dense rechargeable lithium metal batteries with minimal electrolyte content.

Amorphous Fluorinated Acrylate Polymer Dielectrics for Flexible Transistors and Logic Gates with High Operational Stability.

Fluorinated amorphous polymeric gate-insulating materials for organic thin-film transistors (OTFTs) not only form hydrophobic surfaces but also significantly reduce traps at the interface between the organic semiconductor and gate insulator. Therefore, these polymeric materials can enhance the OTFT's operation stability. In this study, we synthesized a new polymeric insulating material series composed of acrylate and fluorinated functional groups (with different ratios) named MBHCa-F and used them as gate insulators for OTFTs and in other applications. The insulating features of the MBHCa-F polymers, including surface energy, surface atomic content properties, dielectric constant, and leakage current, were clearly analyzed with respect to the content of the fluorinated functional groups. At higher fluorine-based functional group content, the polymeric series exhibited higher fluorine-based contents at the surface and superior electrical properties, such as field-effect mobility and driving stability, at OTFTs. Therefore, we believe that this study provides a substantial method for synthesizing polymeric insulating materials to enhance the operational stability and electrical performance of OTFTs.

Identification of miR-143-3p as a diagnostic biomarker in gastric cancer.

BACKGROUND: Gastric cancer (GC) is among the most common types of gastrointestinal cancers and has a high incidence and mortality around the world. To suppress the progression of GC, it is essential to develop diagnostic markers. MicroRNAs regulate GC development, but a clearer insight into their role is needed before they can be applied as a molecular markers and targets. METHODS: In this study, we assessed the diagnostic value of differentially expressed microRNAs as potential diagnostic biomarkers for GC using data for 389 tissue samples from the Cancer Genome Atlas (TCGA) and 21 plasma samples from GC patients. RESULTS: The expression of hsa-miR-143-3p (also known as hsa-miR-143) was significantly downregulated in GC according to the TCGA data and plasma samples. The 228 potential target genes of hsa-miR-143-3p were analyzed using a bioinformatics tool for miRNA target prediction. The target genes correlated with extracellular matrix organization, the cytoplasm, and identical protein binding. Furthermore, the pathway enrichment analysis of target genes showed that they were involved in pathways in cancer, the phosphoinositide 3-kinase (PI3K)-protein kinase B (Akt) signaling pathway, and proteoglycans in cancer. The hub genes in the protein-protein interaction (PPI) network, were matrix metallopeptidase 2 (MMP2), CD44 molecule (CD44), and SMAD family member 3 (SMAD3). CONCLUSIONS: This study suggests that hsa-miR-143-3p may be used as a diagnostic marker for GC, contributing via the pathways involved in the development of GC.

Modulating Ionic Transport and Interface Chemistry via Surface-Modified Silica Carrier in Nano Colloid Electrolyte for Stable Cycling of Li-Metal Batteries.

Tailoring the Li+ microenvironment is crucial for achieving fast ionic transfer and a mechanically reinforced solid-electrolyte interphase (SEI), which administers the stable cycling of Li-metal batteries (LMBs). Apart from traditional salt/solvent compositional tuning, this study presents the simultaneous modulation of Li+ transport and SEI chemistry using a citric acid (CA)-modified silica-based colloidal electrolyte (C-SCE). CA-tethered silica (CA-SiO2 ) can render more active sites for attracting complex anions, leading to further dissociation of Li+ from the anions, resulting in a high Li+ transference number (≈0.75). Intermolecular hydrogen bonds between solvent molecules and CA-SiO2 and their migration also act as nano-carrier for delivering additives and anions toward the Li surface, reinforcing the SEI via the co-implantation of SiO2 and fluorinated components. Notably, C-SCE demonstrated Li dendrite suppression and improved cycling stability of LMBs compared with the CA-free SiO2 colloidal electrolyte, hinting that the surface properties of the nanoparticles have a huge impact on the dendrite-inhibiting role of nano colloidal electrolytes.

Semiconducting MOFs on ultraviolet laser-induced graphene with a hierarchical pore architecture for NO2 monitoring.

Due to rapid urbanization worldwide, monitoring the concentration of nitrogen dioxide (NO2), which causes cardiovascular and respiratory diseases, has attracted considerable attention. Developing real-time sensors to detect parts-per-billion (ppb)-level NO2 remains challenging due to limited sensitivity, response, and recovery characteristics. Herein, we report a hybrid structure of Cu3HHTP2, 2D semiconducting metal-organic frameworks (MOFs), and laser-induced graphene (LIG) for high-performance NO2 sensing. The unique hierarchical pore architecture of LIG@Cu3HHTP2 promotes mass transport of gas molecules and takes full advantage of the large surface area and porosity of MOFs, enabling highly rapid and sensitive responses to NO2. Consequently, LIG@Cu3HHTP2 shows one of the fastest responses and lowest limit of detection at room temperature compared with state-of-the-art NO2 sensors. Additionally, by employing LIG as a growth platform, flexibility and patterning strategies are achieved, which are the main challenges for MOF-based electronic devices. These results provide key insight into applying MOFtronics as high-performance healthcare devices.

Current developments of eco-friendly organic field-effect transistors: from molecular engineering of organic semiconductors to greener device processing.

Replacing environmentally damaging toxic halogenated/aromatic hydrocarbon organic solvents commonly used in solution-processed organic field-effect transistors with more sustainable green solvents has in recent years become a subject of various studies. In the current review, we summarize the properties of solvents used to process organic semiconductors and relate these properties to the toxicities of the solvents. And then, the research efforts to avoid using toxic organic solvents are reviewed, in particular the efforts involving molecular engineering of organic semiconductors achieved by introducing solubilizing side chains or substituents into the backbone and with synthetic strategies to asymmetrically deform the structure of the organic semiconductors and random copolymerization, as well as efforts involving the use of miniemulsion-based nanoparticles to process organic semiconductors.

Confronting Sulfur Electrode Passivation and Li Metal Electrode Degradation in Lithium-Sulfur Batteries Using Thiocyanate Anion.

Salt anions with a high donor number (DN) enable high sulfur utilization in lithium-sulfur (Li-S) batteries by inducing three-dimensional (3D) Li2 S growth. However, their insufficient compatibility with Li metal electrodes limits their cycling stability. Herein, a new class of salt anion, thiocyanate (SCN- ), is presented, which features a Janus character of electron donor and acceptor. Due to a strong Li+ coordination by SCN- and the direct interaction of SCN- with polysulfide anions, the LiSCN electrolyte has a remarkably high lithium polysulfide solubility. This electrolyte induces 3D Li2 S formation and ameliorates cathode passivation, even more than Br- , a typical high DN anion. Moreover, SCN- forms a Li3 N-enriched stable SEI layer at the surface of the Li metal electrode, enhancing cycling stability. A Li-S battery with the LiSCN electrolyte shows high current density operation (2.54 mA cm⁻2 ) with high discharge capacity (1133 mAh g⁻1 ) and prolonged cycle life (100 cycles). This work demonstrates that the cathode and anode performance in a Li-S battery can be simply and concurrently enhanced by the single salt anion.

Comparison of cyclosporine and systemic corticosteroid for treating drug reaction with eosinophilia and systemic symptoms syndrome: A retrospective 20-year single-centre study in South Korea.

BACKGROUND/OBJECTIVES: Drug reaction with eosinophilia and systemic symptoms (DRESS) syndrome is a potentially life-threatening hypersensitive disorder. Cyclosporine has been indicated for adverse cutaneous drug eruptions. However, studies evaluating its clinical effectiveness in DRESS syndrome have been rare. This study aimed to evaluate the clinical efficacy of cyclosporine in DRESS syndrome compared to that of systemic corticosteroids. METHODS: In the cyclosporine group, oral cyclosporine was administered twice a day for a total of 2-3 mg/kg/day for 1 week, and subsequently reduced to 1-1.5 mg/kg/day for extended treatment. In the corticosteroid group, intravenous or oral methylprednisolone was administered at 1-1.5 mg/kg/day for 1 week, with variable tapering plans. Laboratory changes before and after treatment, hospitalized days, treatment periods, and time to normalization from clinical manifestations in each group were statistically evaluated. Adverse effects of these regimens were observed during the entire treatment period. RESULTS: Eighty patients were enrolled in this retrospective study. The cyclosporine and corticosteroid group had 27 and 53 patients, respectively. Total leucocyte and eosinophil counts, liver enzymes, and C-reactive proteins were significantly decreased after treatment in both groups. There were no statistically significant differences observed in hospitalized days, treatment period, and time to normalization from clinical manifestations between the two groups. The corticosteroid group experienced relatively more adverse effects than the cyclosporine group. CONCLUSIONS: Cyclosporine was discovered to be clinically effective in DRESS syndrome and this study suggests that cyclosporine could be a feasible primary therapeutic option for DRESS syndrome.

A postulated model for photoimmunopathogenesis of chronic actinic dermatitis around adaptive immunity, including Th17 cells, Tregs, TRMs, cytotoxic T cells, and/or common-γ chain receptor+ cells.

BACKGROUND/PURPOSE: The pathogenesis of chronic actinic dermatitis (CAD) is more complicated than other photodermatoses. However, the relationship between the clinical severity of CAD and the offending photocontact or contact allergens or both, and the correlations of CAD immunopathogenesis with the immunoregulatory molecules involved in adaptive immunity are yet to be investigated. METHODS: We performed phototesting with broad-spectrum ultraviolet (UV) B, UVA, and visible light to establish the presence of photosensitivity in 121 patients with CAD, together with photopatch and contact patch testing. Nine patients with CAD were selected according to their clinical severity score for CAD (CSS-CAD), and triple direct immunofluorescence analysis was performed with paraffin-embedded skin biopsy samples. RESULTS: As CSS-CAD was closely correlated with the multiplicity of photo(contact) allergens, particularly photoallergens, three or more photoallergens were detected in the severe CAD group (52.5%); less in the moderate group (32.8%); and only one in the mild group (14.8%; P = .025). In the groups showing greater severity of disease, the absolute numbers of IFN-γ+ , IL-17+ , CD4+, CD8+, common-γ chain receptor (common-γCR)+ , and CD69+ tissue-resident memory cells increased on average; there was also an increase in the CD4+/CD8+ cell ratio, with the more severely affected groups. However, the levels of TNF-α+ and FoxP3+ regulatory T (Treg) cells and the mean IL-17/IFN-γ cell ratio decreased in the more severely affected CSS-CAD subgroups. CONCLUSIONS: Based on the clinical analysis and immunopathogenic results, avoidance of excessive sun exposure, and topical and systemic blocking agents for photo(contact) allergens are recommended. Additionally, conventional immunomodulators and emerging agents including JAK-STAT inhibitors may be administered for CAD treatment in the future.

Sparse Hierarchical Representation Learning on Functional Brain Networks for Prediction of Autism Severity Levels.

Machine learning algorithms have been widely applied in diagnostic tools for autism spectrum disorder (ASD), revealing an altered brain connectivity. However, little is known about whether an magnetic resonance imaging (MRI)-based brain network is related to the severity of ASD symptoms in a large-scale cohort. We propose a graph convolution neural network-based framework that can generate sparse hierarchical graph representations for functional brain connectivity. Instead of assigning initial features for each node, we utilized a feature extractor to derive node features and the extracted representations can be fed to a hierarchical graph self-attention framework to effectively represent the entire graph. By incorporating connectivity embeddings in the feature extractor, we propose adjacency embedding networks to characterize the heterogeneous representations of the brain connectivity. Our proposed model variants outperform the benchmarking model with different configurations of adjacency embedding networks and types of functional connectivity matrices. Using this approach with the best configuration (SHEN atlas for node definition, Tikhonov correlation for connectivity estimation, and identity-adjacency embedding), we were able to predict individual ASD severity levels with a meaningful accuracy: the mean absolute error (MAE) and correlation between predicted and observed ASD severity scores resulted in 0.96, and r = 0.61 (P < 0.0001), respectively. To obtain a better understanding on how to generate better representations, we investigate the relationships between the extracted feature embeddings and the graph theory-based nodal measurements using canonical correlation analysis. Finally, we visualized the model to identify the most contributive functional connections for predicting ASD severity scores.

Hippocampal Metastasis Rate Based on Non-Small Lung Cancer TNM Stage and Molecular Markers.

Hippocampal-avoidance whole-brain radiation therapy (HA-WBRT) is justified because of low hippocampal brain metastases (BM) rate and its prevention of cognitive decline. However, we hypothesize that the risk of developing BM in the hippocampal-avoidance region (HAR) may differ depending on the lung-cancer stage and molecular status. We retrospectively reviewed 123 patients with non-small cell lung cancer (NSCLC) at the initial diagnosis of BM. The number of BMs within the HAR (5 mm expansion) was counted. The cohort was divided into patients with and without BMs in the HAR, and their clinical variables, TNM stage, and epidermal growth factor receptor (EGFR) status were compared. The most influential variable predicting BMs in the HAR was determined using multi-variable logistic regression, classification and regression tree (CART) analyses, and gradient boosting method (GBM). The feasibility of HAR expansion was tested using generalized estimating equation marginal model. Patients with BMs in the HAR were more frequently non-smokers, and more likely to have extra-cranial metastases and EGFR mutations (p<0.05). Multi-variable analysis revealed that extra-cranial metastases were independently associated with the presence of BM in the HAR (odds ratio=8.75, p=0.04). CART analysis and GBM revealed that the existence of extra-cranial metastasis was the most influential variable predicting BM occurrence in the HAR (variable importance: 23% and relative influence: 37.38). The estmated BM incidence of patients without extra-cranial metastases in th extended HAR (7.5-mm and 10-mm expansion) did not differ significantly from that in the conventional HAR. In conclusion, NSCLC patients with extra-cranial metastases were more likely to have BMs in the HAR than those without extra-cranial metastases.

Molecular Engineering of Printed Semiconducting Blends to Develop Organic Integrated Circuits: Crystallization, Charge Transport, and Device Application Analyses.

Solution-based printing has contributed to the facile deposition of various types of materials, including the building blocks of printed electronics. In particular, solution-processable organic semiconductors (OSCs) are regarded as one of the most fascinating candidates for the fabrication of printed electronics. Herein, we report electrohydrodynamic (EHD) jet-printed p- and n-type OSCs, namely 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-PEN) and 6,13-bis((triisopropylsilyl)ethynyl)-5,7,12,14-tetraazapentacene (TIPS-TAP), and their use as single-OSC layers and as OSC mixed p-n layers to fabricate solution-processed p-, n-, and ambipolar-type organic field-effect transistors (OFETs). Use of the dragging mode of EHD jet printing, a process driven under a low electrostatic field with a short nozzle-to-substrate distance, was found to provide favorable conditions for growth of TIPS-PEN and TIPS-TAP crystals. In this way, the similar molecular structures of TIPS-PEN and TIPS-TAP yielded a homogeneous solid solution and showed ambipolar transport properties in OFETs. Therefore, the combination of single- and mixed-OSC layers enabled the preparation of various charge-transported devices from unit to integrated devices (NOT, NAND, NOR, and multivalued logic). Therefore, this fabrication technology can be useful for assisting in the production of OSC layers for practical applications in the near future.

Channel Scaling Dependent Photoresponse of Copper-Based Flexible Photodetectors Fabricated Using Laser-Induced Oxidation.

Copper (Cu) oxide compounds (CuxO), which include cupric (CuO) and cuprous (Cu2O) oxide, have been recognized as a promising p-channel material with useful photovoltaic properties and superior thermal conductivity. Typically, deposition methods or thermal oxidation can be used to obtain CuxO. However, these processes are difficult to apply to flexible substrates because plastics have a comparatively low glass transition temperature. Also, additional patterning steps are needed to fabricate applications. In this work, we fabricated a metal-semiconductor-metal photodetector using laser-induced oxidation of thin Cu films under ambient conditions. Raman spectroscopy, scanning electron microscopy-energy-dispersive X-ray spectroscopy, and atomic force microscopy were used to study the composition and morphology of our devices. Moreover, the photoresponse of this device is reported herein. We performed an in-depth analysis of the relationship between the channel size and number of carriers using scanning photocurrent microscopy. The carrier transport behaviors were identified; the photocurrent decreased as the length and width of the channel increased. Furthermore, we verified the suitability of the device as a flexible photodetector using a variety of bending tests. Our in-depth analysis of this Cu-based flexible photodetector could play an important role in understanding the mechanisms of other flexible photovoltaic applications.